Home >Services Services
  • General Knowledge of Stainless Steel Elbows

    General Knowledge of Stainless Steel Elbows

    Posted: 08/10/2017 03:59:21  Hits: 12
    Stainless steel elbows' materials make stainless steel elbows differ from carbon steel elbows, and chemical composition of the materials will keep surfaces of stainless steel elbows from rust and corrosion. Stainless steel elbows are used for changing directions of pipelines in pipe systems. St...
  • The Commonly Used Pipe Fittings (Part Two)

    The Commonly Used Pipe Fittings (Part Two)

    Posted: 07/26/2017 08:49:38  Hits: 6
    Crosses Crosses are pipe fittings or connecting parts for pipes. Crosses are used at the pipes where fluid of the main pipeline needs to be diverted. Pipe crosses include equal crosses and reducing crosses. The four ends of equal crosses have the same diameters; reducing crosses' two pipe ends w...
  • The Commonly Used Pipe Fittings (Part One) 

    The Commonly Used Pipe Fittings (Part One) 

    Posted: 07/18/2017 11:12:58  Hits: 12
    Do you know the commonly used pipe fittings? What are the characteristics of the pipe fittings? Pipe fittings are parts connecting pipes to form pipelines. Pipe fittings cover a wide range, and the common ones are pipe unions, pipe couplings, pipe sleeves, hose clamps, pipe tees, flanges, etc. What ...
  • Tapping Processes of Stainless Steel Pipe Fittings' Internal Threads 

    Tapping Processes of Stainless Steel Pipe Fittings' Internal Threads 

    Posted: 07/12/2017 11:31:47  Hits: 8
    Stainless steel threaded pipe fittings are pipe fittings with threads. They are often used for water and gas pipes, water pipes with small diameters, compressed air pipes and low pressure steam pipes. Stainless steel threaded pipe fittings are connected to threaded pipe ends to form pipelines. We ca...
  • Special Installation Requirements of Gaskets

    Special Installation Requirements of Gaskets

    Posted: 06/22/2017 02:53:50  Hits: 5
    Gaskets are a kind of sealing spare parts which are used for fluid transportation of machinery, equipment and pipelines. Gaskets can be divided into metal gaskets and nonmetal gaskets based on materials. Metal gaskets include copper gaskets, stainless steel gaskets, iron gaskets and aluminum gaskets...
  • Installation Requirements of Pipe Gaskets

    Installation Requirements of Pipe Gaskets

    Posted: 05/26/2017 03:53:02  Hits: 21
    Pipe gaskets are a kind of pipe fittings used for sealing machinery, equipment and pipelines with liquid. Pipe gaskets adopt metal or non-metallic plate and are made by cutting or stamping processes. They are used for sealing pipes and mechanical components. Pipe gaskets are classified into metal se...
  • A Simple Introduction of Pipe joints

    A Simple Introduction of Pipe joints

    Posted: 05/18/2017 03:31:51  Hits: 14
    Pipe joints are components that connect pipes or connect pipes to hydraulic components in hydraulic systems. This is a general term for connectors that can be assembled in a fluid path. Pipe joints are classified into welding type, bite type, withholding type and flared type. A pipe joint is a con...
  • Processes of Tees 

    Processes of Tees 

    Posted: 05/15/2017 01:23:29  Hits: 15
    There are two different processes for making tees, including Hydro-forming and Hot-forming. Hydro-forming  The hydro-forming of the tee is a forming process that makes the metal liquid expand from the branch pipe by the shaft compensation of the metal material. The process is using special hyd...
  • We Need to Pay Attention to Several Problems for Purchasing Pipe Fittings

    We Need to Pay Attention to Several Problems for Purchasing Pipe Fittings

    Posted: 05/08/2017 03:52:06  Hits: 20
     Several Problems for Purchasing Pipe Fittings 1. Material Problem Many companies use nonstandard materials, which refers to the amount of nickel. We can use solution to differentiate, but it is clear that this is a misunderstanding. Because the small burden only contains about 7% of nickel, wh...
  • The Forming Process and Continuous Casting Technology with High Efficiency for Stamping Carbon Steel Elbows

    The Forming Process and Continuous Casting Technology with High Efficiency for Stamping Carbon Steel Elbows

    Posted: 03/27/2017 04:31:32  Hits: 16
    The basic forming process of stamping carbon steel elbows is: firstly we welded a polygonal cross-section of polygonal ring shell or polygonal fan-shaped shell with closed ends. After the inner part of the shall was filled with pressure mediums, the cross section will be gradually changed from polyg...
 123 Next >> 

Tel: 86-592-5204188  Fax: 86-592-5204189  E-mail: sales@landeepipefitting.com